IDENTIFY YOUR
SPA’S HEATER BELOW:
|
|
|
|
|
|
Please identify your spa’s heater (located in the
motor compartment) in the following pictures to
determine which trouble shooting process to follow.
1. Unplug the spa (110v), or turn the breakers off
(220v).
2. REMOVE the filters from the spa and do not return them to spa until the water is
heated.
3. Remove any debris from the filter compartment.
4. Open the equipment compartment door.
5. Reset the heater hi limit and spa hi limit located on the left side of the
control box.
6. Close the equipment compartment door.
7. Plug the spa in (110v), or turn both breakers on
(220v).
8. Check the spa for heat after 24 hours (110v) or 12
hours (220v).
If the spa is still not heating service is required –
call 207-883-9193 or email kbevan@mainelytubs.com
If your heater HAS a reset button, follow these
instructions:
1. Unplug the spa (110v), or turn off both breakers
(220v).
2. REMOVE the filters from the spa and do not return them to spa until water has heated.
3. Remove any debris from the filter compartment.
4. Open the equipment compartment.
5. Reset the Heating Element (refer to diagram of heater
to locate reset button). Be sure to use something
other than your finger to reset the button (a Philips head screwdriver, spa
door screw or golf tee are
suggested.)
6. Close the equipment compartment door.
7. Plug the spa in (110v), or turn both breakers on
(220v).
8. Check the spa for heat after 24 hours (110v) or 12 hours
(220v).
9. If the spa is still not heating, service is required.
If the spa is still not heating service is required –
call 207-883-9193 or email kbevan@mainelytubs.com
If your heater DOES NOT HAVE a reset button, follow
these instructions:
1. Unplug the spa (110v), or turn off both breakers
(220v).
2. REMOVE the filters from the spa and do not return them to spa until water has heated.
3. Remove any debris from the filter compartment.
4. Plug the spa in (110v) or turn both breakers on
(220v).
5. Check the spa for heat after 24 hours (110v), or 12
hours (220v).
6. If the spa is still not heating, service is required.
If the spa is still not heating service is required –
call 207-883-9193 or email kbevan@mainelytubs.com